Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 450

www.dell.com | support.dell.com Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Example Figure 20-33. show interfaces switchport Command Example FTOS#show interfaces switchport Name: GigabitEthernet 13/0 802.1QTagged: Hybrid Vlan membership: Vlan 2, Vlan 20 Native VlanId: 20 Name: GigabitEthernet 13/1 802.1QTagged: True Vlan membership: Vlan 2 Name: GigabitEthernet 13/2 802.1QTagged: True Vlan membership: Vlan 2 Name: GigabitEthernet 13/3 802.1QTagged: True Vlan membership: Vlan 2 --More-- Table 20-8. Items in show interfaces switchport Command Example Items Name 802.1QTagged Vlan membership Description Displays the interface's type, slot and port number. Displays whether if the VLAN tagged ("True"), untagged ("False"), or hybrid ("Hybrid", which supports both untagged and tagged VLANs by port 13/0. Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1, this field can display native VLAN membership by port 13/0. Related Commands interface show ip interface show interfaces show interfaces transceiver Configure a physical interface on the switch. Displays Layer 3 information about the interfaces. Display information on a specific physical interface or virtual interface. Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. show interfaces transceiver s S6000 Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. Syntax show interfaces [tengigabitethernet | fortyGigE] slot/port transceiver 450 | Interfaces