Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 526
distribute-list redistributed-override, domain-password
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 526 highlights
www.dell.com | support.dell.com Defaults Not configured. Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage You can assign a name to a routing process so a prefix list will be applied to only the routes derived Information from the specified routing process. Related Commands distribute-list in redistribute Filters networks received in updates. Redistributes routes from one routing domain to another routing domain. distribute-list redistributed-override S6000 Supress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the network. Syntax distribute-list redistributed-override in To return to the default, use the no distribute-list redistributed-override in command. Defaults No default behavior or values Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Version 9.0.2.0 Introduced on the S6000. Introduced on the S4810. Introduced IPv6 ISIS support Usage When the command is executed, IS-IS will not download the route to the routing table if the same route Information was redistributed into IS-IS routing protocol on the same router. domain-password S6000 Set the authentication password for a routing domain. Syntax domain-password [hmac-md5 | encryption-type ] password To disable the password, enter no domain-password. 526 |