Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 116

www.dell.com | support.dell.com Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on S6000 Introduced on the Z9000. show ip accounting access-list s z S6000 Display the IP access-lists created on the switch and the sequence of filters. Syntax show ip accounting {access-list access-list-name | cam_count} interface interface Parameters access-list-name cam_count interface interface Enter the name of the ACL to be displayed. List the count of the CAM rules for this ACL. Enter the keyword interface followed by the interface type and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: S-Series Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S6000. Introduced on the Z9000. Introduced on S-Series. Introduced Example Figure 6-3. Command Example: show ip accounting access-lists FTOS#show ip accounting access FILTER1 interface gig 1/6 Extended IP access list FILTER1 seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets) seq 10 deny ip any 191.2.0.0 /16 order 4 seq 15 deny ip any 191.3.0.0 /16 seq 20 deny ip any 191.4.0.0 /16 seq 25 deny ip any 191.5.0.0 /16 Table 6-1 defines the information in Figure 6-3. Table 6-1. show ip accounting access-lists Command Example Field Field "Extended IP..." Description Displays the name of the IP ACL. 116 | Access Control Lists (ACL)