Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 854

www.dell.com | support.dell.com -p port-number -v {1 | 2} (OPTIONAL) Enter the keyword -p followed by the port number. Range: 1 to 65536 Default: 22 (OPTIONAL) Enter the keyword -v followed by the SSH version 1 or 2. Default: The version from the protocol negotiation Defaults As above. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.9.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. Introduced VRF Example Figure 39-14. ssh Command Example FTOS#ssh 123.12.1.123 -l ashwani -p 5005 -v 2 Secure DHCP Commands DHCP as defined by RFC 2131 provides no authentication or security mechanisms. Secure DHCP is a suite of features that protects networks that use dynamic address allocation from spoofing and attacks. • clear ip dhcp snooping • ip dhcp relay • ip dhcp snooping • ip dhcp snooping database • ip dhcp snooping binding • ip dhcp snooping database renew • ip dhcp snooping trust • ip dhcp source-address-validation • ip dhcp snooping vlan • show ip dhcp snooping clear ip dhcp snooping z S6000 Clear the DHCP binding table. Syntax clear ip dhcp snooping binding Command Modes EXEC Privilege Default None 854 | Security