Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 633
show ip rpf Command Example, Table 28-1., show ip mroute Command Example Fields, Syntax
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 633 highlights
Table 28-1. show ip mroute Command Example Fields Field (S,G) uptime Incoming interface Outgoing interface list: Description Displays the forwarding entry in the multicast route table. Displays the amount of time the entry has been in the multicast forwarding table. Displays the reverse path forwarding (RPF) information towards the source for (S,G) entries and the RP for (*,G) entries. Lists the interfaces that meet one of the following: • a directly connected member of the Group • statically configured member of the Group • received a (*,G) or (S,G) Join message show ip rpf s z S6000 View reverse path forwarding. Syntax show ip rpf Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Usage Information Static mroutes are used by network administrators to control the reachability of the multicast sources. If a PIM registered multicast source is reachable via static mroute as well as unicast route, the distance of each route is examined and the route with shorter distance is the one the PIM selects for reachability. Example Note: The default distance of mroutes is zero (0) and is CLI configurable on a per route basis. Figure 28-3. show ip rpf Command Example FTOS#show ip rpf RPF information for 10.10.10.9 RPF interface: Gi 3/4 RPF neighbor: 165.87.31.4 RPF route/mask: 10.10.10.9/255.255.255.255 RPF type: unicast Multicast | 633