Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 702
Table 30-3., show ip pim tib Command Example Fields, S = PIM Sparse Mode
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 702 highlights
www.dell.com | support.dell.com Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2 Outgoing interface list: TenGigabitEthernet 8/0 (*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2 Outgoing interface list: TenGigabitEthernet 8/0 FTOS# Table 30-3. show ip pim tib Command Example Fields Field (S, G) uptime expires RP flags Incoming interface RPF neighbor Outgoing interface list: Description Displays the entry in the multicast PIM database. Displays the amount of time the entry has been in the PIM route table. Displays the amount of time until the entry expires and is removed from the database. Displays the IP address of the RP/source for this entry. List the flags to define the entries: • D = PIM Dense Mode • S = PIM Sparse Mode • C = directly connected • L = local to the multicast group • P = route was pruned • R = the forwarding entry is pointing toward the RP • F = FTOS is registering this entry for a multicast source • T = packets were received via Shortest Tree Path • J = first packet from the last hop router is received and the entry is ready to switch to SPT • K=acknowledge pending state Displays the reverse path forwarding (RPF) interface towards the RP/ source. Displays the next hop from this interface towards the RP/source. Lists the interfaces that meet one of the following criteria: • a directly connect member of the Group. • statically configured member of the Group. • received a (*,G) Join message. 702 | PIM-Sparse Mode (PIM-SM)