Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 31

Command History Example (S6000) Version 9.0.2.0 Version 8.3.11.1 Version 8.3.12.0 Introduced on the S6000 Introduced on the Z9000 Introduced on S4810. FTOS# show boot system stack-unit 0 Current system image information in the system: Type Boot Type A B Stack-unit 0 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot] FTOS# show bootvar z S6000 Display the variable settings for the system boot parameters. Syntax show bootvar Command Modes EXEC Privilege Command History Version 9.0.2.0 version 8.3.11.4 Version 8.3.11.1 Introduced on the S6000 Output expanded to display current reload mode (normal or Jumpstart). Introduced on the Z9000 Example (show bootvar) Related Commands FTOS#show bootvar PRIMARY IMAGE FILE = system://B SECONDARY IMAGE FILE = tftp://10.16.127.35/FTOS-SI-9-0-2-0.bin DEFAULT IMAGE FILE = system://A LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist SECONDARY NETWORK CONFIG FILE = variable does not exist CURRENT IMAGE FILE = system://B CURRENT CONFIG FILE 1 = flash://startup-config CURRENT CONFIG FILE 2 = variable does not exist CONFIG LOAD PREFERENCE = local first BOOT INTERFACE GATEWAY IP ADDRESS = 10.16.132.254 Reload Mode = normal-reload FTOS# cd Set the location of configuration files on local devices. cd Set the location of configuration files from a remote network. show file s z S6000 Syntax Display contents of a text file in the local filesystem. show file filesystem File Management | 31