Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 358

www.dell.com | support.dell.com clear ip dhcp s z S6000 Reset DHCP counters. Syntax clear ip dhcp [binding {address} | conflict | server statistics] Parameters binding address conflicts server statistics Enter this keyword to delete all entries in the binding table. Enter the IP address to clear the binding entry for a single IP address. Enter this keyword to delete all of the log entries created for IP address conflicts. Enter this keyword to clear all the server counter information. Command Mode EXEC Privilege Default None Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Usage Information Entering after clear ip dhcp binding, clears all the IPs from the binding table. debug ip dhcp server s z S6000 Display FTOS debugging messages for DHCP. Syntax debug ip dhcp server [events | packets] Parameters events packet Enter this keyword to display DHCP state changes. Enter this keyword to display packet transmission/reception. Command Mode EXEC Privilege Default None Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series default-router s z S6000 Assign a default gateway to clients based on address pool. Syntax default-router address [address2...address8] 358 | Dynamic Host Configuration Protocol (DHCP)