Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 349

Usage Information The unit numbers given are internal port numbers. For a cross reference of the internal and user port numbers, see the Z9000 Debugging and Diagnostics chapter in the FTOS Configuration Guide for the Z9000 System. hardware watchdog z S6000 Set the watchdog timer to trigger a reboot and restart the system. Syntax hardware watchdog stack-unit { | all} Defaults Enabled Command Mode CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on S6000 Introduced on Z9000 Usage Information This command enables a hardware watchdog mechanism that automatically reboots an FTOS switch/ router with a single unresponsive unit. This is a last resort mechanism intended to prevent a manual power cycle. show hardware layer2 z S6000 Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe. Syntax show hardware layer2 {eg-acl | in-acl} stack-unit id port-set 0-0 Parameters eg-acl | in-acl stack-unit id port-set 0-0 Enter either the keyword eg-acl or the keyword in-acl to select between ingress or egress ACL data. Enter the keyword stack-unit to select a stack ID. Unit ID range: Z9000: 0 Enter the keyword port-set with a port-pipe number - 0 or 0. The S25 models of the S-Series have only port-pipe 0. Defaults No default behavior Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on S6000 Introduced on Z9000 Usage Information The unit numbers given are internal port numbers. For a cross reference of the internal and user port numbers, see the Z9000 Debugging and Diagnostics chapter in the FTOS Configuration Guide for the Z9000 System. Debugging and Diagnostics | 349