Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 667

show ip ospf database asbr-summary z S6000 Display information about AS Boundary LSAs. Syntax show ip ospf process-id database asbr-summary [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on S6000. Introduced on Z9000 Introduced support for Multi-Process OSPF. Example Figure 29-8. Command Example: show ip ospf database asbr-summary (Partial) FTOS#show ip ospf 100 database asbr-summary OSPF Router with ID (1.1.1.10) (Process ID 100) Summary Asbr (Area 0.0.0.0) LS age: 1437 Options: (No TOS-capability, No DC, E) LS type: Summary Asbr Link State ID: 103.1.50.1 Advertising Router: 1.1.1.10 LS Seq Number: 0x8000000f Checksum: 0x8221 Length: 28 Network Mask: /0 TOS: 0 Metric: 2 LS age: 473 Options: (No TOS-capability, No DC, E) LS type: Summary Asbr Link State ID: 104.1.50.1 Advertising Router: 1.1.1.10 LS Seq Number: 0x80000010 Checksum: 0x4198 Length: 28 --More-- Open Shortest Path First (OSPFv2) | 667