Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 780
show config, show ip rip database
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 780 highlights
www.dell.com | support.dell.com show config z S6000 Display the changes you made to the RIP configuration. Default values are not shown. Syntax show config Command Modes ROUTER RIP Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Example Figure 36-2. show config Command Example in ROUTER RIP Mode FTOS(conf-router_rip)#show config ! router rip network 172.31.0.0 passive-interface GigabitEthernet 0/1 FTOS(conf-router_rip)# show ip rip database z S6000 Display the routes learned by RIP. If the switch learned no RIP routes, no output is generated. Syntax show ip rip database [ip-address mask] Parameters ip-address mask (OPTIONAL) Specify an IP address in dotted decimal format to view RIP information on that network only. If you enter an IP address, you must also enter a mask for that IP address. (OPTIONAL) Specify a mask, in /network format, for the IP address. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Example Figure 36-3. show ip rip database Command Example (partial) FTOS#show ip rip database Total number of routes in RIP database: 1624 204.250.54.0/24 [50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15 204.250.54.0/24 auto-summary 203.250.49.0/24 [50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14 203.250.49.0/24 auto-summary 210.250.40.0/24 [50/2] via 1.1.18.2, 00:00:14, Vlan 18 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 210.250.40.0/24 auto-summary 207.250.53.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 207.250.53.0/24 auto-summary 780 | Router Information Protocol (RIP)