Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 898
logging synchronous, logging trap
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 898 highlights
www.dell.com | support.dell.com Related Commands logging Enable the logging to another device. logging synchronous S6000 Synchronize unsolicited messages and FTOS output. Syntax logging synchronous [level level | all] [limit number-of-buffers] To disable message synchronization, use the no logging synchronous [level level | all] [limit number-of-buffers] command. Parameters all level level all limit number-of-buffers Enter the keyword all to ensure that all levels are printed asynchronously. Enter the keyword level followed by a number as the severity level. A high number indicates a low severity level and visa versa. Range: 0 to 7. Default: 2 Enter the keyword all to turn off all Enter the keyword limit followed by the number of buffers to be queued for the terminal after which new messages are dropped Range: 20 to 300 Default: 20 Defaults Disabled. If enabled without level or number-of-buffers options specified, level = 2 and number-of-buffers = 20 are the defaults. Command Modes LINE Command History Version 9.0.2.0 Introduced on the S6000. Usage When logging synchronous is enabled, unsolicited messages appear between software prompts and Information outputs. Only the messages with a severity at or below the set level are sent to the console. If the message queue limit is reached on a terminal line and messages are discarded, a system message appears on that terminal line. Messages may continue to appear on other terminal lines. Related Commands logging on Enables logging. logging trap s z S6000 Specify which messages are logged to the Syslog server based the message severity. Syntax logging trap [level] To return to the default values, enter default logging trap. To disable logging, enter no logging trap. 898 | Simple Network Management Protocol and Syslog