Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 911
Spanning Tree Protocol (STP), Overview, Commands
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 911 highlights
44 Spanning Tree Protocol (STP) Overview The commands in this chapter configure and monitor the IEEE 802.1d Spanning Tree protocol (STP) and are supported on all Dell Networking switch/routing platforms. The symbols s z under command headings indicate which Dell Networking - S6000 , S-Series or Z-Series, respectively - support the command. Commands • bridge-priority • bpdu-destination-mac-address • debug spanning-tree • description • disable • forward-delay • hello-time • max-age • protocol spanning-tree • show config • show spanning-tree 0 • spanning-tree bridge-priority z S6000 Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree. Syntax bridge-priority {priority-value | primary | secondary} To return to the default value, enter no bridge-priority. Parameters priority-value Enter a number as the bridge priority value. Range: 0 to 65535. Default: 32768. Spanning Tree Protocol (STP) | 911