Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 824

www.dell.com | support.dell.com Related Commands username Enable a user. timeout login response z S6000 Specify how long the software will wait for login input (for example, user name and password) before timing out. Syntax timeout login response seconds To return to the default values, enter no timeout login response. Parameters seconds Enter a number of seconds the software will wait before logging you out. Range: 1 to 300. Default: 300 seconds. Defaults seconds = 300 seconds Command Modes LINE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Information The software measures the period of inactivity defined in this command as the period between consecutive keystrokes. For example, if your password is "password" you can enter "p" and wait 29 seconds to enter the next letter. username z S6000 Establish an authentication system based on user names. Syntax username name [access-class access-list-name] [nopassword | {password | secret} [encryption-type] password] [privilege level] If you do not want a specific user to enter a password, use the nopassword option. To delete authentication for a user, use the no username name command. Parameters name access-class access-list-name nopassword password secret Enter a text string for the name of the user up to 63 characters. Enter the keyword access-class followed by the name of a configured access control list (either a IP access control list or MAC access control list). Enter the keyword nopassword to specify that the user should not enter a password. Enter the keyword password followed by the encryption-type or the password. Enter the keyword secret followed by the encryption-type or the password. 824 | Security