Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 370

www.dell.com | support.dell.com Default Disabled Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Related Commands ip dhcp relay Manually re-set the remote-id for Option 82. information-agent remote-id ip dhcp relay information-agent remote-id z S6000 Manually re-set the remote-id for Option 82. Syntax ip dhcp relay information-agent remote-id [hostname | remote-id] Parameters hostname remote-id Set the hostname as the remote-id in Option 82. Enter the name of the remote-id, maximum 64 characters. Command Modes CONFIGURATION Default Chassis MAC address Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Usage Information Option 82 is comprised of two sub-options, circuit id and remote id. Remote id uses the MAC address of the relay agent which adds Option 82 to identify the host sending the message. Use the ip dhcp relay information-agent remote-id command to change the default remote-id value. Related Commands ip dhcp relay information-option Enable Option 82 ip dhcp snooping verify mac-address s z S6000 Validate a DHCP packet's source hardware address against the client hardware address field (CHADDR) in the payload. Syntax [no] ip dhcp snooping verify mac-address Command Modes CONFIGURATION Default Disabled 370 | Dynamic Host Configuration Protocol (DHCP)