Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 524

www.dell.com | support.dell.com description S6000 Enter a description of the IS-IS routing protocol Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the IS-IS protocol (80 characters maximum). Defaults No default behavior or values Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on S6000. Introduced on the S4810. Related Commands router isis Enter ROUTER mode on the switch. distance S6000 Define the administrative distance for learned routes. Syntax distance weight [ip-address mask [prefix-list]] To return to the default values, enter the no distance weight command. Parameters weight ip-address mask prefix-list The administrative distance value indicates the reliability of a routing information source. Range: 1 to 255. (A higher relative value indicates lower reliability. Routes with smaller values are given preference.) Default: 115 (OPTIONAL) Enter an IP address in dotted decimal format and enter a mask in either dotted decimal or /prefix format. (OPTIONAL) Enter the name of a prefix list name. Defaults weight = 115 Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on S6000. Introduced on the S4810. Usage Information The administrative distance indicates the trust value of incoming packets. A low administrative distance indicates a high trust rate. A high value indicates a lower trust rate. For example, a weight of 255 is interpreted that the routing information source is not trustworthy and should be ignored. 524 |