Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 189

Usage Information The set local-preference command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preference command. Related Commands bgp default local-preference Change default LOCAL_PREF attribute for all routes. set metric s z S6000 Configure a filter to assign a new metric to redistributed routes. Syntax set metric [+ | -] metric-value To delete a setting, enter no set metric. Parameters + metric-value (OPTIONAL) Enter + to add a metric-value to the redistributed routes. (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes. Enter a number as the new metric value. Range: zero (0) to 4294967295 Defaults Not configured Command Modes ROUTE-MAP Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000 Introduced on the Z9000. Support added for S-Series Related Commands set automatic-tag set level set metric-type set tag Compute the tag value of the route. Specify the OSPF area for route redistribution. Specify the route type assigned to redistributed routes. Specify the tag assigned to redistributed routes. set metric-type s z S6000 Configure a filter to assign a new route type for routes redistributed to OSPF. Syntax set metric-type {internal | external | type-1 | type-2} To delete a setting, enter no set metric-type. Parameters internal external type-1 type-2 Enter the keyword internal to assign the Interior Gateway Protocol metric of the next hop as the route's BGP MULTI_EXIT_DES (MED) value. Enter the keyword external to assign the IS-IS external metric. Enter the keyword type-1 to assign the OSPF Type 1 metric. Enter the keyword type-2 to assign the OSPF Type 2 metric. Access Control Lists (ACL) | 189