Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 326
fcoe priority-bits, iscsi priority-bits
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
www.dell.com | support.dell.com Parameters {all | auto-detect-timer | config-exchng | fail | mgmt | resource | sem | tlv} Enter the type of debugging, where: • all: enables all DCBX debugging operations. • auto-detect-timer: enables traces for DCBX auto-detect timers. • config-exchng: enables traces for DCBX configuration exchanges. • fail: enables traces for DCBX failures. • mgmt: enables traces for DCBX management frames. • resource: enables traces for DCBX system resource frames. • sem: enables traces for the DCBX state machine. • tlv: enables traces for DCBX TLVs. Defaults none Command Modes EXEC PRIVILEGE Command History Version 9.0.2.0 Version 8.3.16.0 Introduced on the S6000. Introduced on MXL 10/40GbE Switch IO Module fcoe priority-bits S6000 Configure the FCoE priority advertised for the FCoE protocol in application priority TLVs. Syntax fcoe priority-bits priority-bitmap To remove the configured FCoE priority, use the no fcoe priority-bits command. Parameters priority-bitmap Enter the priority-bitmap range. Range: 1 to FF. Defaults 0x8 Command Modes PROTOCOL LLDP Command History Version 9.0.2.0 Version 8.3.16.0 Introduced on the S6000. Introduced on MXL 10/40GbE Switch IO Module Usage Information This command is available at the global level only. iscsi priority-bits S6000 Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs. Syntax iscsi priority-bits priority-bitmap To remove the configured iSCSI priority, use the no iscsi priority-bits command. Parameters priority-bitmap Enter the priority bitmap. Range: 1 to FF. 326 | Data Center Bridging (DCB)