Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 175

show running-config acl s S6000 Display the ACL running configuration. Syntax show running-config acl Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Example Figure 6-20. Command Example: show running-config acl FTOS#show running-config acl ! ip access-list extended ext-acl1 ! ip access-list standard std-acl1 ! ipv6 access-list Acl1 description IPV6 Access-list seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes remark 10 Remark for Entry # 10 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count !FTOS# test cam-usage s S6000 Verify that enough ACL CAM space is available for the IPv6 ACLs you have created. Syntax test cam-usage service-policy input input policy name linecard {number | all} Parameters policy-map name number Enter the name of the policy-map to verify. Enter all to get information for all the linecards, or enter the linecard number to get information for a specific card. Range: 0-6 Defaults None Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage This command applies to both IPv4 and IPv6 CAM Profiles, but is best used when verifying QoS Information optimization for IPv6 ACLs. Access Control Lists (ACL) | 175