Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 788

www.dell.com | support.dell.com Command Modes CONFIGURATION INTERFACE (config-if) Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 rmon event z S6000 Add an event in the RMON event table. Syntax rmon event number [log] [trap community] [description string] [ownername] To disable RMON on an interface, use the no rmon event number [log] [trap community] [description string] command. Parameters number log trap community description string owner name Assign an event number in integer format from 1 to 65535. The number value must be unique in the RMON Event Table. (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry is triggered and sets the eventType in the RMON MIB to log or log-and-trap. Default: No log (OPTIONAL) Enter the keyword trap followed by an SNMP community string to configure the eventType setting in the RMON MIB. This sets either snmp-trap or log-and-trap. Default: public (OPTIONAL) Enter the keyword description followed by a string describing the event. (OPTIONAL) Enter the keyword owner followed by the name of the owner of this event. Defaults as described above Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 rmon hc-alarm z S6000 Set an alarm on any MIB object. Syntax rmon hc-alarm number variable interval {delta | absolute} rising-threshold value event-number falling-threshold value event-number [owner string] To disable the alarm, use the no rmon hc-alarm number command. 788 | Remote Monitoring (RMON)