Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 382

www.dell.com | support.dell.com clear frrp s z S6000 Clear the FRRP statistics counters. Syntax clear frrp [ring-id] Parameters ring-id (Optional) Enter the ring identification number. Range: 1 to 255 Defaults No default values or behavior Command Modes EXEC Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Example Figure 17-1. clear frrp Command Examples FTOS#clear frrp clears the frrp counters for all the available rings Clear frrp statistics counter on all ring [confirm] yes confirmation required FTOS#clear frrp 4 clears the frrp counters on the specified ring Usage Information Related Commands Clear frrp statistics counter for ring 4 [confirm] yes FTOS# confirmation required Executing this command, without the optional ring-id, will clear statistics counters on all the available rings. Force10 requires a command line confirmation before the command is executed. This commands clears the following counters: • hello Rx and Tx counters • Topology change Rx and Tx counters • The number of state change counters show frrp Display the Resilient Ring Protocol configuration debug frrp s z S6000 Enable FRRP debugging. Syntax debug frrp {event | packet | detail} [ring-id] [count number] To disable debugging, use the no debug frrp {event | packet | detail} {ring-id} [count number] command. 382 | Force10 Resilient Ring Protocol (FRRP)