Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 749

qos-policy-input s z S6000 Create a QoS input policy on the router. Syntax qos-policy-input qos-policy-name cpu-qos|layer2 To remove an existing input QoS policy from the router, use no qos-policy-input qos-policy-name cpu-qos|layer2 command. Parameters qos-policy-name cpu-qos layer2 Enter your input QoS policy name in character format (32 character maximum). Enter the cpu-qos keyword to assign this ACL to control plane traffic only (CoPP). (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 9.0.2.0 Introduced on the S6000. Introduced on Z9000. Policy name character limit increased from 16 to 32. Usage Information Use this command to specify the name of the input QoS policy. Once input policy is specified, rate-police can be defined. This command enables the qos-policy-input configuration mode- (conf-qos-policy-in). Related Commands rate-police Incoming traffic policing function qos-policy-output s z S6000 Create a QoS output policy. Syntax qos-policy-output qos-policy-name To remove an existing output QoS policy, use no qos-policy-output qos-policy-name command. Parameters qos-policy-name Enter your output QoS policy name in character format (32 character maximum). Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 9.0.2.0 Introduced on the S6000. Introduced on Z9000. Policy name character limit increased from 16 to 32. Quality of Service (QoS) | 749