Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 322
dcb-output, dcb-policy input
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
www.dell.com | support.dell.com dcb-output S6000 Create a DCB output policy to associate an ETS configuration with priority traffic. Syntax dcb-output policy-name To remove the ETS output policy from an interface, use the no dcb-policy output command. Parameters policy-name Enter the DCB output policy name. Maximum: 32 alphanumeric characters. Defaults none Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.16.1 Introduced on the S6000. Introduced on MXL 10/40GbE Switch IO Module Usage Information Create a DCB output policy to associate a priority group with an ETS output policy with scheduling and bandwidth configuration. You can apply a DCB output policy on multiple egress ports. When you apply an ETS output policy on an interface, ETS-configured scheduling and bandwidth allocation take precedence over any configured settings in QoS output policies. The ETS configuration associated with 802.1 priority traffic in a DCB output policy is used in DCBX negotiation with ETS peers. Related Commands dcbx port-role Apply the output policy. dcb-policy input S6000 Apply the input policy with the PFC configuration to an ingress interface. Syntax dcb-policy input policy-name To delete the input policy, use the no dcb-policy input command. Parameters policy name Enter the input policy name with the PFC configuration to an ingress interface. Defaults none Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.16.1 Introduced on the S6000. Introduced on MXL 10/40GbE Switch IO Module Usage Information If you apply an input policy with PFC disabled (no pfc mode on): 322 | Data Center Bridging (DCB)