Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 51

enable s z S6000 Enter the EXEC Privilege mode or any other privilege level configured. After entering this command, you may need to enter a password. Syntax enable [level] Parameters level (OPTIONAL) Enter a number for a privilege level of FTOS. Range: 0 to 15. Default: 15 Defaults 15 Command Modes EXEC Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on S6000 Introduced on the Z9000 Introduced on S-Series Usage Information Users entering the EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect against unauthorized access, use the enable password command to configure a password for the enable command at a specific privilege level. If no privilege level is specified, the default is privilege level 15. Related Commands enable password Configure a password for the enable command and to access a privilege level. enable optic-info-update interval s Z S6000 Enable polling intervals of optical information updates for SNMP. Syntax enable optical-info-update interval seconds To disable optical power information updates, use the no enable optical-info-update interval command. Parameters interval seconds Enter the keyword interval followed by the polling interval in seconds. Range: 120 to 6000 seconds Default: 300 seconds (5 minutes) Defaults Disabled Command Modes CONFIGURATION Command History Version 9.0.2.0 Introduced on S6000 Control and Monitoring | 51