Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 241
neighbor description, neighbor distribute-list
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Syntax neighbor {ip-address | peer-group-name} default-originate [route-map map-name] To remove a default route, use the no neighbor {ip-address | peer-group-name} default-originate command. Parameters ip-address peer-group-name route-map map-name Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the default route of all routers in that peer group. (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Defaults Not configured. Command Modes ROUTER BGP Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-originate command Information configured, the software does not apply the set filters in the route map to that BGP peer or neighbor. Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on the S6000. Introduced on the Z9000. Introduced support on S-Series neighbor description s z S6000 Assign a character string describing the neighbor or group of neighbors (peer group). Syntax neighbor {ip-address | peer-group-name} description text To delete a description, use the no neighbor {ip-address | peer-group-name} description command. Parameters ip-address peer-group-name text Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group. Enter a continuous text string up to 80 characters. Defaults Not configured. Command Modes ROUTER BGP Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on the S6000. Introduced on the Z9000. Introduced support on S-Series neighbor distribute-list s z S6000 Distribute BGP information via an established prefix list. Border Gateway Protocol | 241