Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 263

*> 5.0.0.0/10 63.114.8.33 0 *> 5.0.0.0/11 63.114.8.33 0 --More-- Table 9-1 defines the information displayed in Figure 9-6 0 18508 ? 0 18508 ? Table 9-1. show ip bgp Command Example Fields Field Network Next Hop Metric LocPrf Weight Path Description Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight Lists all the ASs the route passed through to reach the destination network. Related Commands Command History show ip bgp community neighbor maximum-prefix View BGP communities. Control number of network prefixes received. Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on the S6000. Introduced on the Z9000. Introduced support on S-Series show ip bgp cluster-list s z S6000 View BGP neighbors in a specific cluster. Syntax show ip bgp [ipv4 unicast] cluster-list [cluster-id] Parameters ipv4 unicast cluster-id (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the cluster id in dotted decimal format. Command Modes EXEC EXEC Privilege Example Figure 9-7. Command Example: show ip bgp cluster-list (Partial) FTOS#show ip bgp cluster-list BGP table version is 64444683, local router ID is 120.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network * I 10.10.10.1/32 * I Next Hop 192.68.16.1 192.68.16.1 Metric 0 0 LocPrf Weight Path 100 0 i 100 0 i Border Gateway Protocol | 263