Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 597
advertise med softphone-voice
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 597 highlights
Syntax advertise med power-via-mdi To return to the default, use the no advertise med power-via-mdi command. Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered, Information LLDP-MED endpoint device. Related Commands debug lldp interface show lldp neighbors show running-config lldp Debug LLDP Display the LLDP neighbors Display the LLDP running configuration advertise med softphone-voice s z S6000 Configure the system to advertise softphone to enable IP telephony on a computer so that the computer can be used as a phone. Syntax advertise med softphone-voice {vlan-id layer2_priority DSCP_value} | {priority-tagged number} To return to the default, use the no advertise med softphone-voice {vlan-id layer2_priority DSCP_value} | {priority-tagged number} command. Parameters vlan-id layer2_priority DSCP_value priority-tagged number Enter the VLAN ID. Range: 1 to 4094 Enter the Layer 2 priority. Range: 0 to 7 Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. Related Commands debug lldp interface Debug LLDP Link Layer Detection Protocol (LLDP) | 597