Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 750
rate-police, rate-shape
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 750 highlights
www.dell.com | support.dell.com Usage Information Use this command to specify the name of the output QoS policy. Once output policy is specified, rate-shape, scheduler strict, bandwidth-percentage, and WRED can be defined. This command enables the qos-policy-output configuration mode-(conf-qos-policy-out). When rate-shape in QoS policy is applied both on queue level and aggregate mode, the queue-based shaping occurs first followed by the aggregate rate shaping. rate-police s z S6000 Specify the policing functionality on incoming traffic. Syntax rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-rate [burst-KB]] Parameters kbps committed-rate burst-KB peak peak-rate Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On S-Series make the following value a multiple of 64. On the Dell Networking recommends using a value greater than or equal to 512 as lower values does not yield accurate results. The default granularity is Megabits per second (Mbps). Range: 0 to 40000 Enter the committed rate in Mbps. Range: 0 to 40000 Mbps (OPTIONAL) Enter the burst size in KB. Range: 16 to 200000 KB Default:100 KB (OPTIONAL) Enter the keyword peak followed by the peak rate in Mbps. Range: 0 to 40000 Mbps Default: Same as designated for committed-rate Defaults Burst size is 100 KB. peak-rate is by default the same as committed-rate. Granularity for committed-rate and peak-rate is Mbps unless the kbps option is used. Command Modes QOS-POLICY-IN Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.8.0 Introduced on the S6000. Introduced on Z9000. Added kbps option on S- Series. Usage The default burst size is 100Kb.If a different value is required, you must explicitly configure the burst Information size to the required value. Related Commands rate police qos-policy-input Specify traffic policing on the selected interface. Create a QoS output policy. rate-shape s z S6000 Shape traffic output as part of the designated policy. 750 | Quality of Service (QoS)