Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 876

www.dell.com | support.dell.com Related Commands snmp-server group Configure an SNMP server group show snmp user s z S6000 Display the information configured on each SNMP user name. Syntax show snmp user Command Modes EXEC EXEC Privilege Example Command History Figure 42-4. show snmp user Command Example FTOS#show snmp user User name: v1v2creadu Engine ID: 0000178B02000001E80214A8 storage-type: nonvolatile active Authentication Protocol: None Privacy Protocol: None FTOS# Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series snmp ifmib ifalias long s z S6000 Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters. Syntax snmp ifmib ifalias long Defaults Interface description truncated beyond 63 characters Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Example Figure 42-5. snmp ifmib ifalias long Command Example FTOS#config!------command run on host connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to IF-MIB::ifAlias.134792448 = STRING: !------command run on Dell Networkingswitch FTOS#snmp ifmib ifalias long 876 | Simple Network Management Protocol and Syslog