Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 578

www.dell.com | support.dell.com Related Commands interface vlan untagged Configure a VLAN. Specify which interfaces in a VLAN are untagged. track ip z S6000 Syntax Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member interfaces. track ip interface To remove the tracking feature from the VLAN, use the no track ip interface command. Parameters interface Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel . • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured Command Modes INTERFACE VLAN Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Information Related Commands When this command is configured, the VLAN is operationally UP if any of the interfaces specified in the track ip command are operationally UP, and the VLAN is operationally DOWN if none of the tracking interfaces are operationally UP. If the track ip command is not configured, the VLAN's Layer 3 operational state depends on all the members of the VLAN. The Layer 2 state of the VLAN, and hence the Layer 2 traffic is not affected by the track ip command configuration. interface vlan tagged Configure a VLAN. Specify which interfaces in a VLAN are tagged. untagged z S6000 Add a Layer 2 interface to a VLAN as an untagged interface. Syntax untagged interface To remove an untagged interface from a VLAN, use the no untagged interface command. 578 | Layer 2