Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 396

www.dell.com | support.dell.com Parameters brief interface (OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP configuration. (OPTIONAL) Enter the following keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by the Port Channel number: S-Series Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Example Usage Information Related Commands Figure 18-2. show gvrp brief Command Example R3#show gvrp brief GVRP Feature is currently enabled. Port GVRP Status Edge-Port Gi 3/0 Disabled No Gi 3/1 Disabled No Gi 3/2 Enabled No Gi 3/3 Disabled No Gi 3/4 Disabled No Gi 3/5 Disabled No Gi 3/6 Disabled No Gi 3/7 Disabled No Gi 3/8 Disabled No R3#show gvrp brief If no ports are GVRP participants, the message output changes from: GVRP Participants running on to GVRP Participants running on no ports show gvrp statistics Display the GVRP statistics 396 | GARP VLAN Registration (GVRP)