Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 923

clock read-calendar s z S6000 Set the software clock on the switch from the information set in hardware clock (calendar). Syntax clock read-calendar Defaults Not configured. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Usage Information In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete this command (that is, there is not a "no" version of this command). clock set s z S6000 Set the software clock in the switch. Syntax clock set time month day year Parameters time month day year Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months, in English. You can enter the number of a day and change the order of the display to time day month year. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time month day year. Enter a four-digit number as the year. Range: 1993 to 2035. Defaults Not configured Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Example Figure 45-2. clock set Command Example FTOS#clock set 16:20:00 19 may 2001 FTOS# System Time and Date | 923