Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 417

Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Version 6.5.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Updated definition of the learning-limit option for clarity. Example Related Commands Figure 20-1. clear counters Command Example FTOS#clear counters Clear counters on all interfaces [confirm] mac learning-limit show interfaces Allow aging of MACs even though a learning-limit is configured or disallow station move on learnt MACs. Displays information on the interfaces. clear dampening s z S6000 Clear the dampening counters on all the interfaces or just the specified interface. Syntax clear dampening [interface] Parameters interface (Optional) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a port channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Without a specific interface specified, the command clears all interface dampening counters Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S4810 Example Related Commands FTOS#clear dampening gigabitethernet 1/2 Clear dampening counters on Gi 1/2 [confirm] y FTOS# show interfaces dampening dampening Display interface dampening information. Configure dampening on an interface. Interfaces | 417