Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 681

show ip ospf neighbor z S6000 Display the OSPF neighbors connected to the local router. Syntax show ip ospf process-id neighbor Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on S6000. Introduced on Z9000 Introduced process-id option, in support of Multi-Process OSPF. Example Figure 29-15. Command Example: show ip ospf process-id neighbor FTOS#show ip ospf 34 neighbor Neighbor ID Pri State Dead Time Address 20.20.20.7 1 FULL/DR 00:00:32 182.10.10.3 192.10.10.2 1 FULL/DR 00:00:37 192.10.10.2 20.20.20.1 1 FULL/DROTHER00:00:36 192.10.10.4 FTOS# Interface Area Gi 0/0 0.0.0.2 Gi 0/1 0.0.0.1 Gi 0/1 0.0.0.1 Table 29-11. Command Example Descriptions: show ip ospf process-id neighbor Row Heading Neighbor ID Pri State Dead Time Address Interface Area Description Displays the neighbor router ID. Displays the priority assigned neighbor. Displays the OSPF state of the neighbor. Displays the expected time until FTOS declares the neighbor dead. Displays the IP address of the neighbor. Displays the interface type slot/port information. Displays the neighbor's area (process ID). show ip ospf routes z S6000 Display routes as calculated by OSPF and stored in OSPF RIB. Syntax show ip ospf process-id routes Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Open Shortest Path First (OSPFv2) | 681