Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 612

www.dell.com | support.dell.com Parameters peer peer address sa-cache summary Enter the keyword peer followed by the peer address in a dotted decimal format (A.B.C.D.) Enter the keyword sa-cache to display the Source-Active cache. Enter the keyword summary to display a MSDP peer summary. Defaults Not configured Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Example 1 Figure 26-1. show ip msdp peer Command Example FTOS#show ip msdp peer 100.1.1.1 Peer Addr: 100.1.1.1 Local Addr: 100.1.1.2(639) Connect Source: none State: Established Up/Down Time: 00:00:08 Timers: KeepAlive 60 sec, Hold time 75 sec SourceActive packet count (in/out): 0/0 SAs learned from this peer: 0 SA Filtering: Input (S,G) filter: none Output (S,G) filter: none FTOS# Example 2 Figure 26-2. show ip msdp sa-cache Command Example FTOS#show ip msdp sa-cache MSDP Source-Active Cache - 1 entries GroupAddr SourceAddr RPAddr 224.1.1.1 172.21.220.10 172.21.3.254 FTOS# LearnedFrom 172.21.3.254 Expire UpTime 102 00:02:52 Example 3 Figure 26-3. show ip msdp summary Command Example FTOS#show ip msdp summary Peer Addr Local Addr State Source SA Up/Down 72.30.1.2 72.30.1.1 Established none 0 00:00:03 72.30.2.2 72.30.2.1 Established none 0 00:00:03 72.30.3.2 72.30.3.1 Established none 0 00:00:02 FTOS# Description peer1 peer2 test-peer-3 show ip msdp sa-cache rejected-sa z S6000 Display the rejected SAs in the SA cache. Syntax show ip mdsp sa-cache rejected-sa 612 | Multicast Source Discovery Protocol (MSDP)