Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 762

www.dell.com | support.dell.com Table 35-3. Pre-defined WRED Profile Threshold Values (S6000) Pre-defined WRED Profile Name Minimum Threshold Maximum Threshold wred_drop 0 0 wred_teng_y 594 5941 wred_teng_g 594 5941 wred_fortyg_y 594 5941 wred_fortyg_g 594 5941 Maximum Drop Rate 100 100 50 50 25 Table 35-4. Pre-defined WRED Profile Threshold Values (S4810) Pre-defined WRED Profile Name Minimum Threshold Maximum Threshold wred_drop 0 0 wred_teng_y 467 4671 wred_teng_g 467 4671 wred_fortyg_y 467 4671 wred_fortyg_g 467 4671 Maximum Drop Rate 100 100 50 50 25 Related Commands wred-profile Create a WRED profile. trust s z S6000 Specify dynamic classification (DSCP) or dot1p to trust. Syntax trust {diffserv [fallback]| dot1p [fallback]} Parameters diffserv dot1p fallback Enter the keyword diffserv to specify trust of DSCP markings. Enter the keyword dot1p to specify trust dot1p configuration. Enter this keyword to classify packets according to their DSCP value as a secondary option in case no match occurs against the configured class maps. Defaults No default behavior or values Command Modes CONFIGURATION (conf-policy-map-in) Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Usage When trust is configured, matched bytes/packets counters are not incremented in the show qos Information statistics command. Dynamic mapping honors packets marked according to the standard definitions of DSCP. The default mapping table is detailed in the following table. 762 | Quality of Service (QoS)