Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 419

Related Commands clear dampening show interfaces dampening Clear the dampening counters on all the interfaces or just the specified interface. Display interface dampening information. description s z S6000 Assign a descriptive text string to the interface. Syntax description desc_text To delete a description, enter no description. Parameters desc_text Enter a text string up to 240 characters long. Defaults No description is defined. Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S4810 Usage Information To use special characters as a part of the description string, you must enclose the whole string in double quotes.Entering a text string after the description command overwrites any previous text string configured as the description. The shutdown and description commands are the only commands that you can configure on an interface that is a member of a port channel. Use the show interfaces description command to display descriptions configured for each interface. Related Commands show interfaces description Display description field of interfaces. duplex (Management) s z S6000 Set the mode of the Management interface. Syntax duplex {half | full} To return to the default setting, enter no duplex. Parameters half Enter the keyword half to set the Management interface to transmit only in one direction. full Enter the keyword full to set the Management interface to transmit in both directions. Defaults Not configured Command Modes INTERFACE Command History Version 9.0.2.0 Introduced on then S6000. Interfaces | 419