Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 747
policy-aggregate, policy-map-input
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 747 highlights
Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000. Usage You must first enter the class-map command in order to access this command. You can match against Information only one VLAN ID. Related Commands class-map Create/access a class map. policy-aggregate s z S6000 Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (input/output) applied on an interface. Syntax policy-aggregate qos-policy-name To remove a policy aggregate configuration, use no policy-aggregate qos-policy-name command. Parameters qos-policy-name Enter the name of the policy map in character format (32 characters maximum) Defaults No default behavior or values Command Modes CONFIGURATION (policy-map-input and policy-map-output) This command is supported on S-Series, S6000 and S4810 under policy-map-input mode only. Command History Version 9.0.2.0 Version 8.3.11.1 Version 9.0.2.0 Introduced on the S6000. Introduced on Z9000. Policy name character limit increased from 16 to 32. policy-map-input s z S6000 Create an input policy map. Syntax policy-map-input policy-map-name cpu-qos|layer2 To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos|layer2 command. Parameters policy-map-name cpu-qos layer2 Enter the name for the policy map in character format (32 characters maximum). Enter the cpu-qos keyword to assign this ACL to control plane traffic only (CoPP). (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Quality of Service (QoS) | 747