Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 153
show config
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Parameters sequence-number deny permit any ip-prefix /nn ge min-prefix-length le max-prefix-length bitmask number Enter a number. Range: 1 to 4294967294. Enter the keyword deny to configure a filter to drop packets meeting this condition. Enter the keyword permit to configure a filter to forward packets meeting this condition. (OPTIONAL) Enter the keyword any to match any packets. (OPTIONAL) Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0. (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. Enter the keyword bitmask followed by a bitmask number in dotted decimal format. Defaults Not configured. Command Modes PREFIX-LIST Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Version 6.3.1.0 Introduced on the S6000 Introduced on the Z9000. Added support for S-Series Added bitmask option Usage If the options ge or le are not used, only packets with an exact match to the prefix are filtered. Information Related Commands deny permit Configure a filter to drop packets. Configure a filter to pass packets. show config s z S6000 Display the current PREFIX-LIST configurations. Syntax show config Command Modes PREFIX-LIST Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000 Introduced on the Z9000. Support added for S-Series Example Figure 6-9. Command Example: show config FTOS(conf-nprefixl)#show config ! ip prefix-list snickers Access Control Lists (ACL) | 153