Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 774

www.dell.com | support.dell.com Defaults RIPv1. Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage To enable the interface to send both version of RIP packets, enter ip rip send version 1 2. Information Related Commands ip rip receive version version Sets the RIP version for the interface to receive traffic. Sets the RIP version to be used for the switch software. ip split-horizon z S6000 Enable split-horizon for RIP data on the interface. As described in RFC 2453, the split-horizon scheme prevents any routes learned over a specific interface to be sent back out that interface. Syntax ip split-horizon To disable split-horizon, enter no ip split-horizon. Defaults Enabled Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Related Commands ip poison-reverse Set the prefix for RIP routing updates. maximum-paths z S6000 Set RIP to forward packets over multiple paths. Syntax maximum-paths number To return to the default values, enter no maximum-paths. Parameters number Enter the number of paths. Range: 1 to 16. The default is 4 paths. Defaults 4 Command Modes ROUTER RIP 774 | Router Information Protocol (RIP)