Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 899

Parameters level Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 6. Defaults 6 or informational Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Related Commands logging logging on Enable the logging to another device. Enables logging. show logging s z S6000 Display the logging settings and system messages logged to the internal buffer of the switch. Syntax show logging [number | history [reverse][number] | reverse [number] | summary] Parameters number history reverse summary (OPTIONAL) Enter the number of message to be displayed on the output. Range: 1 to 65535 (OPTIONAL) Enter the keyword history to view only information in the Syslog history table. (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in, first out) order. (OPTIONAL) Enter the keyword summary to view a table showing the number of messages per type and per slot. Slots *7* and *8* represent RPMs. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Introduced on the S6000. Version 8.3.11.1 Introduced on Z9000 Version 7.6.1.0 Support added for S-Series Figure 42-11. show logging Command Example (Partial) FTOS#show logging Syslog logging: enabled Console logging: level debugging Monitor logging: level debugging Buffer logging: level debugging, 5604 Messages Logged, Size (524288 bytes) Trap logging: level informational Oct 8 09:25:37: %RPM1:RP1 %BGP-5-ADJCHANGE: Connection with neighbor 223.80.255.254 closed. Hold time expired Oct 8 09:25:38: %RPM1:RP1 %BGP-5-ADJCHANGE: Neighbor 192.200.13.2 Up Oct 8 09:25:38: %RPM1:RP1 %BGP-5-ADJCHANGE: Neighbor 192.1.1.13 Up Simple Network Management Protocol and Syslog | 899