Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 472

www.dell.com | support.dell.com Parameters Command Modes Command History name EXEC Privilege Version 9.0.2.0 Version 8.3.11.1 Enter the name of the host to delete. Enter * to delete all host table entries. Introduced on the S6000. Introduced on Z9000 clear ip fib stack-unit z S6000 Clear all Forwarding Information Base (fib) entries in the specified stack unit (use this command with caution, see Usage Information below) Syntax clear ip fib stack-unit unit-number Parameters unit-number Enter the number of the stack unit. Range: 0-7 Command Mode EXEC Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Information Use this command to clear Layer 3 CAM inconsistencies. Caution: Executing this command will cause traffic disruption. Related Commands show ip fib stack-unit Show FIB entries on a specified stack-unit. clear ip route z S6000 Clear one or all routes in the routing table. Syntax clear ip route {* | ip-address mask | vrf vrf instance} Parameters * ip-address mask vrf instance Enter an asterisk (*) to clear all learned IP routes. Enter a specific IP address and mask in dotted decimal format to clear that IP address from the routing table. (Optional) Clear only the routes tied to the VRF instance. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 472 | IPv4 Routing