Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 909
storm-control unknown-unicast Interface
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 909 highlights
Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces. Information storm-control unknown-unicast (Interface) z S6000 Configure percentage of unknown-unicast traffic allowed on an interface (ingress only). Syntax storm-control unknown-unicast [percentage decimal_value in] | [wred-profile name]] [packets_per_second in] To disable unknown-unicast storm control on the interface, use the no storm-control unknown-unicast [percentage decimal_value in] | [wred-profile name]] [packets_per_second in] command. Parameters percentage decimal_value in wred-profile name packets_per_second in Enter the percentage of broadcast traffic allowed in to the network. Optionally, you can designate a decimal value percentage, for example, 55.5%. Percentage: 0 to 100 0% blocks all related traffic 100% allows all traffic into the interface Decimal Range: .1 to .9 (Optionally) Enter the keyword wred-profile followed by the profile name to designate a wred-profile. S-Series Only: Enter the packets per second of broadcast traffic allowed into the network. S-Series Range: 0 to 33554431 S4810 Range: 0 to 33554368 The minimum number of PPS limited on the S4810 is 2 Defaults No default behavior or values Command Modes INTERFACE (conf-if-interface-slot/port) Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Storm Control | 909