Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 761

An input policy map with both Trust and Class-map configuration, the Class-map rules are ignored and only the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column will contain the size of the CAM space required for the Trust rule and not the Class-map rule. threshold s z S6000 Specify the minimum and maximum threshold values for the configured WRED profiles. Syntax threshold min number max number max-drop-rate number To remove the threshold values, use the no threshold min number max number max-drop-rate number command. Parameters min number max number max-drop-rate number Enter the keyword min followed by the minimum threshold number depends on the platform. Range: 1024 to 40000 KB Enter the keyword max followed by the maximum threshold number depends on the platform. Range: 1024 to 40000 KB Enter the keyword max-drop-rate followed by the maximum number of packets for the WRED profile. Range: 0-100 KB. S4810, S6000 and Z9000. Defaults No default behavior or values Command Modes CONFIGURATION (config-wred) Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Usage Information Use this command to configure minimum and maximum threshold values for user defined profiles. Additionally, use this command to modify the minimum and maximum threshold values for the pre-defined WRED profiles. If you delete threshold values of the pre-defined WRED profiles, the profiles will revert to their original default values. Quality of Service (QoS) | 761