Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 493

ip-address mask [longer-prefix] summary (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. Command Modes EXEC EXEC Privilege Command History Version 8.3.11.1 Version 9.0.2.0 Introduced on the Z9000. Introduced on the S6000. Example Figure 21-10. show ip cam stack-unit Command Example Table 21-5. show ip cam Command Example Fields Field Destination EC CG V C V Id Mac Addr Port Description Displays the destination route of the index. Displays the number of equal cost multipaths (ECMP) available for the default route for non-Jumbo stack-units. Displays 0,1 when ECMP is more than 8, for Jumbo stack-units. Displays 0. Displays a 1 if the entry is valid and a 0 otherwise. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port. Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor Gi = Gigabit Ethernet interface Te = 10 Gigabit Ethernet interface show ip fib stack-unit z S6000 View all Forwarding Information Base (FIB) entries. Syntax show ip fib stack-unit id [ip-address [mask] [longer-prefixes] | summary] Parameters id ip-address mask Enter the S-Series stack unit ID.Unit ID range: S4810: 0-11 all other S-Series: 0-7 (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. Enter the IP address in dotted decimal format (A.B.C.D). You must enter the mask in slash prefix format (/X). IPv4 Routing | 493