Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 517
adjacency-check, advertise
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 517 highlights
• show config • show isis database • show isis graceful-restart detail • show isis hostname • show isis interface • show isis neighbors • show isis protocol • show isis traffic • spf-interval adjacency-check z S6000 Verify that the "protocols supported" field of the IS-IS neighbor contains matching values to this router. Syntax adjacency-check To disable adjacency check, use the no adjacency-check command. Defaults Enabled Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Usage Use this command to perform protocol-support consistency checks on hello packets. The Information adjacency-check is enabled by default.. advertise S6000 Leak routes between levels (distribute IP prefixes between Level 1 and Level 2 and vice versa). Syntax advertise {level1-into-level2 | level2-into-level1} prefix-list-name To return to the default, use the no advertise {level1-into-level2 | level2-into-level1}[prefix-list-name] command. Parameters level1-into-level2 Enter the keyword level1-into-level2 to advertise Level 1 routes into Level 2 LSPs. This is the default. | 517