Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 595
advertise med guest-voice-signaling
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 595 highlights
Parameters vlan-id layer2_priority DSCP_value priority-tagged number Enter the VLAN ID. Range: 1 to 4094 Enter the Layer 2 priority. Range: 0 to 7 Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Related Commands protocol lldp (Configuration) debug lldp interface show lldp neighbors show running-config lldp Enable LLDP globally. Debug LLDP. Display the LLDP neighbors. Display the LLDP running configuration. advertise med guest-voice-signaling s z S6000 Configure the system to advertise a separate limited voice service for a guest user when the guest voice control packets use a separate network policy than the voice data. Syntax advertise med guest-voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-tagged number} To return to the default, use the no advertise med guest-voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-tagged number} command. Parameters vlan-id layer2_priority DSCP_value priority-tagged number Enter the VLAN ID. Range: 1 to 4094 Enter the Layer 2 priority. Range: 0 to 7 Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Link Layer Detection Protocol (LLDP) | 595