Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 30

www.dell.com | support.dell.com Related Commands Caution: If you elect to format the flash, all files, including the startup configuration file will be lost. If you do decide to format the specified flash, consider saving the running config as the startup config (use the write memory command or copy run start) copy show file show file-systems Copy the current configuration to either the startup-configuration file or the terminal. Display contents of a text file in the local file system. Display information about the file systems on the system. rename s S6000 Rename a file in the local file system. Syntax rename url url Parameters url Enter the following keywords and a filename: • For a file on the internal Flash, enter flash:// followed by the filename. • For a file on the external Flash, enter usbflash:// followed by the filename. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 7.6.1.0 Introduced on the S6000 Introduced on S-Series show boot system s z S6000 Displays information about boot images currently configured on the system. Syntax show boot systemstack-unit {0-11|0-7|0-5| all} Parameters all stack-unit Enter this keyword to display boot image information for all linecards and rpms. Enter this keyword to display boot image information for one or all of the units. S4810 Range: 0 - 11 Z9000 Range: 0 - 7 S6000 Range: 0-5 Defaults No default values or behavior Command Modes EXEC EXEC Privilege 30 | File Management