Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 562

www.dell.com | support.dell.com clear mac-address-table z S6000 Clear the MAC address table of all MAC address learned dynamically. Syntax clear mac-address-table {dynamic | sticky} {address mac-address | all | interface interface | vlan vlan-id} Parameters dynamic sticky address mac-address all interface interface vlan vlan-id Enter the keyword dynamic to specify dynamically-learned MAC addresses. Enter the keyword sticky to specify sticky MAC addresses. Enter the keyword address followed by a MAC address in nn:nn:nn:nn:nn:nn format. Enter the keyword all to delete all MAC address entries in the MAC address table. Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: S-Series Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter the keyword vlan followed by a VLAN ID number from 1 to 4094. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 9.0.0.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Added support for sticky MAC addresses. mac-address-table aging-time z S6000 Specify an aging time for MAC addresses to be removed from the MAC Address Table. Syntax Parameters mac-address-table aging-time seconds seconds Enter either zero (0) or a number as the number of seconds before MAC addresses are relearned. To disable aging of the MAC address table, enter 0. Default: 1800 seconds Defaults 1800 seconds Command Modes CONFIGURATION 562 | Layer 2