Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 632
show ip mroute
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 632 highlights
www.dell.com | support.dell.com show ip mroute s z S6000 View the Multicast Routing Table. Syntax show ip mroute [static | group-address [source-address] | active [rate] | count | summary] Parameters static group-address [source-address] active [rate] count summary (OPTIONAL) Enter the keyword static to view static multicast routes. (OPTIONAL) Enter the multicast group-address to view only routes associated with that group. Enter the source-address to view routes with that group-address and source-address. (OPTIONAL) Enter the keyword active to view only active multicast routes. Enter a rate to view active routes over the specified rate. Range: 0 to 10000000 (OPTIONAL) Enter the keyword count to view the number of multicast routes and packets. (OPTIONAL) Enter the keyword summary to view routes in a tabular format. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Example 1 Figure 28-1. show ip mroute static Command Example Example 2 FTOS#show ip mroute static Mroute: 23.23.23.0/24, interface: Lo 2 Protocol: static, distance: 0, route-map: none, last change: 00:00:23 FTOS# Figure 28-2. show ip mroute Command Example FTOS#show ip mroute IP Multicast Routing Table (*, 224.10.10.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/13 (1.13.1.100, 224.10.10.1), uptime 00:04:03 Incoming interface: GigabitEthernet 3/4 Outgoing interface list: GigabitEthernet 3/12 GigabitEthernet 3/13 (*, 224.20.20.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/4 FTOS# 632 | Multicast